Recovery System
34
Service Manual – SC351
Vacuum System Gasket Cleaning
Note:
The gaskets (L) and (M)
create vacuum in the
system that is necessary
for vacuuming the recovery
water.
1
Drive the machine on a level floor.
2 Check that the function selection knob is turned
to “0” and disconnect the battery connector
3 Open the cover (A) and check the vacuum
system motor gasket (L) for integrity
4 If necessary replace the gasket by removing it
from its housing
5 Remove the recovery tank (C)
6 Check the recovery water duct gasket (M) for
integrity If necessary, replace the gasket
7 Clean with care and reinstall
A
L
M
C
P100790
