Nilfisk-Advance Advance Retriever 2060, Руководство по обслуживанию

Страница: 37 / 165

FORM NO. 56043051 / Retriever
™
2060 - 35
DUST CONTROL SYSTEM
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
IMPELLER MOTOR REMOVAL
WARNING!
Remove key and disconnect battery before servicing impeller.
1 Raise and support hopper cover.
2 See Figure 4. Raise and support shaker assembly and remove Filter (Q).
3 Remove 11 bolts from access cover and remove cover.
4 Remove three hoses to impeller Motor (R). Note: There may be oil in hoses and motor be prepared to cap motor and plug hoses.
Mark hose locations for reassembly.
5 Remove the four Bolts (S) from Impeller Bracket (T) and remove impeller assembly from machine.
6 Remove center Nut (U) and washer from impeller motor shaft and remove Impeller Fan (V).
7 Remove the four Nuts (W) from impeller bracket and remove motor from bracket.
8 Reassemble in reverse order. Note: Be sure the impeller assembly is mounted with the case drain (small hose) on motor facing
down.
FIGURE 4
FRONT
Q
W
R
S
U
V
T