51
- FORM NO. 56043115 - 34 RST
Recovery System
Maintenance of the Recovery Tank Float Switch
If the recovery tank float switch becomes dirty it can impair the operation of the recovery system. A dirty vacuum
shutoff switch can cause the vacuum motor to not function at all, or fail to shut off when the tank is full.
If daily rinsing of the recovery tank is not sufficient to keep the switch clean you may need to remove the float
arm for cleaning. The float arm can be removed easily by grasping it as shown below and twisting to remove. It
is very important that the float switch be reassembled correctly in order to function. See
Figure 3
for the correct
orientation of the switch float arm.
FIGURE 3