24
- FORM NO. 56043115 - 34 RST
Control Panel
Selecting Machine Type (EcoFlex version only)
Selecting the machine type must be done before selecting the scrub deck type in order for the correct scrub deck
values to be available. This menu is only available on EcoFlex version machines and not the AXP or ST versions.
1. Turn the key switch to the off position.
2. While holding the Vacuum Switch (C) and the Wand Switch (F) depressed, turn on the key switch.
3. Hold both switches until the scrub on (M) and scrub off (N )indicators both turn green.
4.
Release both switches.
• The display will show either “Warrior” or “34-RST”
5. Press the Scrub On (D) switch to toggle between the values.
• Select “34-RST”
6. Once the proper machine type has been selected, press the Scrub Off switch (E) to save this setting.
• The display will show the key switch icon.
7. Turn the key switch to the off position to commit the setting.
Chemical Option (EcoFlex Models)
EcoFlex models are equipped with the chemical (detergent) system. To enable or disable this option, do the
following:
1. Turn the key switch to the off position.
2. While holding the Scrub Off
(H)
and Scrub On
(I)
switches depressed, turn the key
switch to the on position.
3. Continue to hold both switches until the Regular Scrub indicator
(I1)
turns yellow.
4. Release both switches. The Scrub Off indicator
(H1)
will turn red.
5. Press the Chemical switch
(F)
to toggle the chemical option between enabled and disabled. The
Chemical indicator will turn green for enabled and be off for disabled.
6. Press the Scrub Off switch
(H)
to save this setting. The display will show the key switch icon
asking user to reset the machine.
7. Turn the key switch to the off position to commit the setting.
I1
H1
H
I
F
