Engine System
33
Service Manual – PBU Propane Floor Burnisher
Oil Filter Replacement
• Drain the engine oil (see Engine Oil Change).
• Using a suitable tool [A], remove the oil filter [B].
• When unscrewing the oil filter, place a suitable
container beneath the oil drip tray to receive oil from
the oil filter and oil passages in the engine.
• Remove the oil filler cap and pour in the specified
type and the amount of oil.
Engine Oil:
Grade:
SJ or higher class
Viscosity: SAE40, SAE30, SAE10W-30/
SAE10W-40, or SAE5W-20
Capacity: [When the oil filter is not removed]
1.5 L (1.6 US qt)
[When the oil filter is removed]
1.7 L (1.8 US qt)
• Check the O-ring [A] on the oil filler cap for damage.
Replace the oil filler cap assembly if O-ring is
damaged.
• When checking the oil level, do not turn oil filler cap
on threads.
Note:
Some increase in oil consumption may
be expected when a multi grade engine
oil (10W-30/10W-40, 5W-20) is used.
Check the oil level more frequently
than recommended interval.
Figure 39 Oil Types and Temperatures
Figure 40 O-Ring
Figure 41 Unscrew Oil Filter
