Installation Considerations
The WS100R is a Decora-style module and is designed to use
standard Decora-style cover plates and mounting hardware.
Decora cover plates (up to 6-gang) with color-matched plate
screws are available from your Niles dealer.
T
ype of Cable
The WS100R connects to the Niles infrar
ed main systems unit
or IRH610 sensor expansion hub with an individual home run
of category 5 cable. When running wires inside walls, most
states and municipalities in the U.S. specify that you must use
a special type of wire. Usually, the requirement is that the
wire has a specific “CL” fire rating, such as “CL-2” or “CL-3”.
Consult your Niles dealer, building contractor, or local build-
ing and inspection department if unsure about which type of
wire is best for your application.
WS100R Mounting Location
Locating the WS100R in the center of a r
oom usually results
in the most even IR receiving coverage, especially if the room
is square shaped. Rooms that are L-shaped or long and
narrow require more careful consideration. With these types
of rooms, installing the WS100R closest to the primary loca-
tion of the user will ensure the best performance.
Receiving Range and Pickup Angle
The r
eceiving range of the WS100R will vary according to the
IR output strength of the remote control being used. Remote
strength varies among brands depending on the number
and size of batteries used, and how many IR emitters the
remote has. For example, remotes that operate on two small
AAA batteries and have only one IR emitter are generally not
3
W
A L L
- M
O U N T
I
N F R A R E D
S
E N S O R
DS00331ACN/WS100R 1/8/04 9:47 AM Page 5
