Niles IntelliControl ICS, Инструкция по установке и настройке

Страница: 63 / 70

63
(800) BUY-HIFI NILES AUDIO CORPORATION
INSTALLER SETTINGS
OPERATING THE SYSTEM
These menus provide system diagnostic information
and allow configuration of ‘permanent’ system settings.
The now playing screen will return if no action is taken
for approximately 15-20 seconds.
1. Press & Hold Niles Logo Key for 5-10 seconds to
open ‘Installer Settings’ Menu
CONTACT
MAC ID#
Select to confirm MAC ID# and Firmware version,
(Touch Screen, Display Keypad or iRemote
®
)
MAX VOLUME
Adjust maximum zone volume and zone Page volume.
Maximum zone volume can help prevent damage to
the speakers and amplifier by setting a maximum out-
put level well under the speakers power handling capa-
bility and amplifiers clipping level. Page volume sets an
undistorted paging level.
SOURCE LEVEL SETTINGS
Adjust GXR2 input levels to balance different source
audio output levels. This procedure requires that all
sources be on and playing. Radio stations should be
tuned to the same channel and Legacy Sources should
be playing program material with similar content. Using
similar or identical program material helps balance the
actual differences in output levels and not differences
in program material. With all sources playing, cycle
through the inputs to get a reference for which sources
are ‘louder’ and ‘softer’ than others.
INTERNAL IR SENSOR
Select the option to enable or disable the internal built-in
IR sensor of the Contact. This is used when interference
from an IR source that cannot be removed from the area,
(A second IR sensor in the same area, Sunlight, Plasma
TV) is affecting the IR sensor built-in to the Contact.
ZONE CONTROLLER
Select this to see the MAC ID and firmware version of
the GXR2 that the keypad is connected to (
May be only
for development purpose) .
TOUCH SCREEN
Selecting this disables the touch screen to allow for clean-
ing. To exit from this screen setting, press the Niles button.
DISPLAY
MAC ID#
Select to confirm MAC ID# and Firmware version,
(Touch Screen, Display Keypad or iRemote)
MAX VOLUME
Adjust maximum zone volume and zone Page volume.
Maximum zone volume can help prevent damage to
the speakers and amplifier by setting a maximum out-
put level well under the speakers power handling capa-
bility and amplifiers clipping level. Page volume sets an
undistorted paging level.
SOURCE LEVEL SETTINGS
Adjust GXR2 input levels to balance different source
audio output levels. This procedure requires that all
sources be on and playing. Radio stations should be
tuned to the same channel and Legacy Sources should
be playing program material with similar content. Using
similar or identical program material helps balance the
actual differences in output levels and not differences
in program material. With all sources playing, cycle
through the inputs to get a reference for which sources
are ‘louder’ and ‘softer’ than others.