Niles IntelliControl ICS, Инструкция по установке и настройке

Страница: 54 / 70

54
(800) BUY-HIFI NILES AUDIO CORPORATION
CAT-5 WIRING
TERMINATION DIAGRAM
The IntelliControl ICS touch screens and keypads connect
to the IntelliControl ICS Modular MultiZone Receiver via
CAT-5 cable. For the system to function properly all runs
of CAT-5 must be pulled in home-runs from the touch
screen and keypad locations to the system head end
where the IntelliControl ICS Modular MultiZone Receiver
and other system components will be located.
The runs of CAT-5 must be terminated with RJ-45 connec-
tors using the T-568A pinout confi guration as follows:
Pin # Description Color Code
1 TX+ White/Green
2 TX–
Green
3 RX+ White/Orange
4 IR
Signal Blue
5 IR Ground White/Blue
6 RX– Orange
7 UI
Power White/Brown
8 UI Ground Brown
Note: TX+ = transmit, RX+ = receive, UI = user interface.
1JO
5"
H ( P # C 0 CS #3
5"
H ( P # C 0 CS #3
RJ-45 Plugs
IntelliControl ICS RJ-45 Pinout and checklist
CONFIGURING USER INTERFACE CONTROLS
INSTALLING AN EXTERNAL
IR SENSOR
To add an IR sensor to a user interface, use the wiring
diagrams and connector detail that follow to adapt an
RJ-45 connector from a user interface to the plug-in
wire terminals on the IR sensor.
%BUB 4UBUVT
(SPVOE
7%$
5BC
%PXO
7
%BUB
4UBUVT
(SPVOE
Pin # Color Code Connector
1 White/Green 12V
2 Green Data
3 White/Orange Ground
4 Blue Empty
5 White/Blue Status
6 Orange
Empty
7 White/Brown Empty
8 Brown Empty
IR Sensor to Touch Screen and Keypad pinout
$-"444&-7%&7*$&
ª/JMFT"VEJP$PSQPSBUJPO
.JBNJ'MPSJEB64"-""$/
$0/5"$5,&:1"%
5 IJTEFWJDFDPNQMJFTXJUIQBSUPGUIF'$$3VMFT
0
QFSBUJPOJTTVCKFDUUPUIFGPMMPXJOHUXPDPOEJUJPOT
5
IJTEFWJDFNVTUBDDFQUBOZJOUFSGFSFODFBOE UIJT
EFWJDFNVTUBDDFQUBOZJOUFSGFSFODFSFDFJWFEJODMVEJOH
JOUFSGFSFODFUIBUNBZDBVTFVOEFTJSFEPQFSBUJPO
4:45&. *34&/403
*34FOTPS
5FSNJOBM
$"5
CONNECTING IR SENSORS
Using a properly configured CAT-5 cable, connect
the IR Sensor terminal on the touch screen or keypad
to the plug-in terminal on an IR Sensor as shown.
CAUTION: These connections are different than those used from
the touch screens or keypads to the IntelliControl ICS Modular
MultiZone Receiver. Be sure to check wire configuration and con-
nections before powering up the system.
CONTACT IR Sensor
IR sensor to Contact touch screen connection
CONFIGURING AND INSTALLING USER INTERFACE CONTROLS