nIleS aUDIo corPoratIon – 1-800-bUY-HIfI – 1-305-238-4373
9
INSTALLATION
MOUNTING ThE DBI-2
Once you have decided on the location for the DBI-2 (generally near the location of the Niles
MultiZone Control System), make sure that the 12V DC power adapter and all cables are
disconnected before mounting.
The DBI-2 can be either mounted on the back of a cabinet or on a wall using screws (not included).
Also, it can be placed on a shelf using the included adhesive rubber feet (see
Figure 1
on page 7).
CONNECTING ThE DBI-2
1. Connect the Audio Output of the DBI-2 to the Paging Input of a compatible Niles MultiZone
System (see
Figure 2
on page 10).
2. (Optional) Connect the Audio Output of a paging system to the Audio Input of the DBI-2
(see
Figure 2
on page 10).
3. Connect standard or illuminated doorbell buttons to the Contact Closure connections
(see
Figure 2
on Page 10).
4. For homes with existing doorbell chimes that will be retained, connect the existing wiring to the
3-30V Trigger (see
Figure 3
on page 11)
5. (Optional) Connect the 12V DC Voltage Trigger Output to a voltage activated device.
(see
Figure 2
on page 10).
6. Connect the included 12V DC in-line power adapter’s voltage output plug into the DBI-2’s power
jack and then plug its AC power cord into an unswitched AC outlet (see
Figure 1
on page 7). The
red LED power indicator will illuminate to confirm proper power connection.
(continued on next page)
