Nikon Total Station DTM-322, Инструкция по эксплуатации

Страница: 64 / 185

4 Applications
50 Total Station DTM-322 Instruction Manual
Setting up a station with known coordinates or azimuth
1. Press
[1]
or select
Known
in the Stn Setup menu.
2. Enter a point name or number in the ST field.
–
If the input point number or name is an
existing point, its coordinates are displayed
and the cursor moves to the HI (Height of
instrument) field.
–
If the point is new, a coordinate input
screen appears. Enter the coordinates for
the point. Press
[ENT]
after each field. When
you press
[ENT]
in the CD field, the new
point is stored.
–
If the specified point has a code, the code
appears in the CD field.
3. Enter the instrument height in the HI field and
then press
[ENT]
.
The Backsight screen appears.
4. Select an input method for defining the
backsight point.
–
To sight the backsight by entering
coordinates, see below.
–
To sight the backsight by entering the azimuth and angle, see page 52 .