142
Recording and Viewing Movies
•
Wind noise reduction
: Select
On
to enable the low-cut filter
for the built-in microphone, reducing noise produced by wind
blowing over the microphone (note that other sounds may
also be affected).
•
Manual movie settings
: Choose
On
to allow manual
adjustments to shutter speed and ISO sensitivity when the
camera is in mode
M
. Shutter speed can be set to values as
fast as
1
/
4000
s; the slowest speed available varies with the frame
rate:
1
/
30
s for frame rates of 24p, 25p, and 30p,
1
/
50
s for 50p, and
1
/
60
s for 60p. If shutter speed is not in this range when live
view starts, it will automatically be set to a supported value,
and remain at this value when live view ends. Note that ISO
sensitivity is fixed at the value selected; the camera does not
adjust ISO sensitivity automatically when
On
is selected for
ISO sensitivity settings
>
Auto ISO sensitivity control
in
the shooting menu (
1
Select
Movie settings
.
Press the
G
button to display the
menus. Highlight
Movie settings
in
the shooting menu and press
2
.
2
Choose movie options.
Highlight the desired item and press
2
, then highlight an option and press
J
.
A
HDMI
When the camera is attached to an HDMI video device, the video
device will display the view through the lens. If the device supports
HDMI-CEC, select
Off
for the
HDMI
>
Device control
option in the
setup menu (
185) before shooting in live view.