100
Basic Camera Setup: The Setup Menu
S
h
ooti
n
g
, Pl
ay
back
an
d
S
e
tup M
e
n
u
s
w
Electronic VR
Choose whether to use electronic VR (vibration reduction) when shooting still
pictures.
When
Auto
is selected,
R
appears on the monitor (
A
6), and electronic VR is
applied depending on shooting conditions.
B
Notes on Electronic Vibration Reduction
•
Except during slow sync mode, electronic VR will not activate when flash is used.
•
If the exposure period exceeds a certain period of time, electronic VR will not function.
•
The effectiveness of electronic VR decreases as camera shake increases.
•
Electronic VR does not reduce the effects of subject movement.
•
Saving a picture on which electronic VR is applied may take some time.
•
Electronic VR will not activate when sensitivity is ISO 800 or above.
•
Electronic VR cannot be used together with date imprint (
A
98). When using date imprint, setting
electronic VR to
Auto
automatically changes the date imprint setting to
Off
.
•
Electronic VR and auto flash with red-eye reduction cannot be used together.
D
Electronic VR Icons in Playback Mode
Pictures on which electronic VR has been applied can be recognized by the
R
icon displayed in full-
frame playback mode. The
Q
icon appears on pictures on which electronic VR cannot be applied
(
A
6, 7).
D
Electronic VR for Movies
To compensate for vibration while shooting a movie, go to the movie menu (
A
56) and enable
Electronic VR
(
A
56).
Auto
When all of the following conditions are met while shooting still pictures, electronic
VR is applied and the effects of camera shake are reduced.
•
The flash is turned off or set to slow sync mode.
•
The shutter speed is slow.
•
The
Continuous
option is set to
Single
.
Off (default setting)
Electronic VR is disabled.
