39
Scene Mode (Shooting Suited to the Shooting Conditions)
y
M
d
Sports
•
While the shutter-release button is held all the way down, images are captured
continuously.
•
The camera can capture about 5 images continuously at a rate of about 5 fps.
•
The frame rate for continuous shooting may become slow depending on the current
image quality setting, image size setting, the memory card used, or shooting
conditions.
•
Focus, exposure, and hue for the second and subsequent images are fixed at the values
determined with the first image.
y
M
f
Party/indoor
•
To avoid the effects of camera shake, hold the camera steady. Set
Vibration reduction
(
165) to
Off
in the setup menu when using a tripod to stabilize the camera during
shooting.
y
M
k
Close-up
On the screen displayed when
k
Close-up
is selected, select
Noise reduction burst
or
Single shot
.
•
Noise reduction burst
: This enables you to shoot a sharp image with a minimum of
noise.
- Press the shutter-release button all the way to capture a series of images which are
combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still
image is displayed. After taking a picture, do not turn the camera off before the screen
switches to the shooting screen.
- If the subject moves or there is a significant camera shake during continuous
shooting, the image may be distorted, overlapped, or blurred.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen on the shooting screen.
- Continuous shooting may not be possible in certain shooting conditions.
•
Single shot
: Saves images with emphasized outlines and contrast.
- One image is captured when the shutter-release button is pressed all the way.
•
The focus mode (
62) setting is changed to
D
(macro close-up) and the camera
automatically zooms to the closest position at which it can focus.
•
You can move the focus area. Press the
k
button, use the multi selector
HIJK
or
rotate it to move the focus area, and press the
k
button to apply the setting.
