VAA14001-R.3603.A
- A9
・
E5400 -
FRONT COVER
• Fit the notch of the lens spacer to the concave section of the lens barrel. Then, set the lens spacer onto the lens
barrel. (Refer to Fig. 1.)
• Set the front cover. (Set it so that the TB2 PCB connector can come out from the top of the FPC
①
.)
• Connect the FPC
①
.
• Connect the connector
②
and set the flash holder.
• Attach the screw
③
(M1.7 × 2.5).
• Attach the screw
④
(M1.7 × 2).
• Attach the 2 screws
⑤
(M1.7 × 3.5).
• Attach the 3 screws
⑥
(M1.7 × 4).
• Connect the connector from the TB2 PCB. (Refer to Fig. 2.)
Notch of lens spacer
Concave section of lens barrel
Fig.1
⑤
④
⑥
②
Flash holder
Push in the cords between the PCBs.
Connector from the TB2 PCB
Fig.2
⑥
③
FPC
①
Lens spacer