14
En
Fr
[Measurement]
Caution — Controls, adjustments or usage of procedures other than those specified herein may
produce negative effects or damage to your health due to laser radiation.
■
Measuring
1. Turn on the power.
(Automatic power shut-off after approx. 8 seconds
unoperated.)
Immediately after power-on
2. Aim at the target.
Position the target at the center of the
target mark.
Standby
*Before measuring, be sure to confirm each mode setting.
*Please refer to each section on how to set each mode.
■
Adjusting diopter
Adjust the diopter to obtain a clear internal display in the viewfinder.
First, rotate the diopter adjustment ring counterclockwise until it comes to a complete stop.
Next, turn on the power and rotate the diopter adjustment ring back and forth until the internal
display comes into focus.
3. Pressing the PWR button starts measurement.
After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.
If you press the PWR button during power-on, another measurement starts.
Содержание ARROW ID 3000
Страница 1: ...Instruction manual Manuel d utilisation En Fr ...
Страница 2: ...English p 3 18 Français p 19 34 ...
Страница 35: ...35 En Fr ...
Страница 36: ...Printed in China 290K 1E 1508 NIKON VISION CO LTD ...