Nikon ARROW ID 3000, Инструкция по эксплуатации

Страница: 11 / 36

11
En
Fr
￭
Inserting/replacing battery
1. Type of battery
3V CR2 lithium battery x1
2. Inserting/replacing battery
2-1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its rubber
packing for water resistance.
2-2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber.
The [-] pole should be positioned toward the inside of the chamber. If the battery is not inserted correctly,
the Nikon Laser Rangefinder will not operate. When replacing the battery, remove the old battery then insert
a new one.
2-3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the
rubber packing for water resistance, but continue to turn it all the way until it stops. Confirm that the cover is
securely closed.
3. Battery level indicator
* The battery condition mark in the internal display warns when the battery needs to be replaced.
Display Description
After power on, displays for 2 seconds only. Sufficient power available.
After power on, displays for 2 seconds only.
Power getting low.
Prepare to replace the battery.
Displayed continuously. Low. Battery should be replaced with a new one.
Blinks. After blinking 3 times, automatically
powers off.
Power exhausted.
Replace the battery.
[First step]