manualshive.com logo in svg

Nikon AF-S VR Zoom-Nikkor ED 24-120mm f/3.5-5.6G IF, Руководство по ремонту

Поделиться
Скачать
Nikon AF-S VR Zoom-Nikkor ED 24-120mm f/3.5-5.6G IF Скачать руководство пользователя страница 53

JAA78271-R.3598.A

- L30 ･ AF-S VR24-120/3.5-5.6G -

INSPECTION OF LENS OPERATIONS 

Check the lens operations by using a personal computer after assembling.
○Check by personal computer

　

● Check by the following considerations:

　　

1. MR encoder operations

　　・

Drive the scanning of lens and check the difference in pulses at the start and end.

　　・

In case the MR head of the MR encoder is malpositioned on the magnetic tape, the difference in pulses gets

   

large.

　　

2. Lens-servo stop accuracy

　　・

Check the number of overrun/underrun pulses (deviation of the stop position from the target position) per the 
specified lens driving.

　　・

In case the irregularity of mechanical operations does not take place in the focus ring driving unit, the underrun 
tends to occur if it is heavy in the cam ring rotation of the MR encoder, while the  overrun tends to occur if it is 
light in its rotation of the MR encoder.

　　

3. Lens-servo time

　　・

Check the servo time (from starting and stopping the servo) when driving the specified lens by using the  
oscilloscope.

　　・

In case the irregularity of mechanical operations does not take place in the focus ring driving unit, the servo-
time tends to be long if it is heavy in the cam ring rotation of the MR encoder, while the servo-time tends to be 
short if it is light in its rotation of the MR encoder.   

　　

4. Switches and lenses

　　・

Check the ON/OFF operations of switches, the distance encoder and zoom encoder.

　

● After inspections

　　

1. When the MR encoder operations are not up to the standard:

    

Readjust the MR duty. (ref. Page L28.)

    

In case the pulse is not up to the standard, adjust the output waveform of the MR encoder again. (ref. Page 

L15.)

    

In case the pulse meets the standard, replace the cam ring unit.

　　

2. When the lens-servo stop accuracy is not up to the standard:

    

Check the output waveform of the MR encoder.  If it is normal, replace the cam ring unit.

　　

3. When the lens-servo time is not up to the standard:

    

Readjust the driving frequency and motor control.

    

In case the lens-servo time is not up to the standard even after the readjustment, replace the cam ring unit.

　　

4. When switches do not work properly:

    

Check the wiring state of the troubled switch or replace it.

INC

Содержание AF-S VR Zoom-Nikkor ED 24-120mm f/3.5-5.6G IF






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды