JAA79351-R.3670.A
- A27 ･ AF-S DX55-200/4-5.6G -
How to create positioning tool of Rear lens-group holder for lens alignment
(AF-SDX 55-200/4--5.6G)
1: Summary
1-1: This is a positioning tool of the rear lens group holder for lens alignment, in order to secure the
position for attaching the rear lens group temporarily.
2: Preparation
2-1: The following is used:
＊
Rear cover ring (JAA78071- Part no. :1K631-287) X 1 pc.
＊
Bayonet mount (JAA78071- Part no.: 1K404-157) X 1 pc.
＊
Mount rotation stopper screw (JAA78071- Part no.: 1K120-012) X 1 pc.
Put with the groove, in which the lock pin of camera body enters, just upward.
3. Procedure
3-1: Put the bayonet mount as shown in Fig. 1.
Put with the groove, in which the lock pin of camera
body enters, just upward.
3-2: Mount the reversed rear cover ring on the position of Fig. 1, and attach them as shown in Fig. 2.
Put with the groove, in which the lock pin of
camera body enters, just upward.
Fig. 1
Fig. 2
Large notch of rear cover ring.
INC
