JAA80551-R.3757.A
- ・AF-S DX 8-05/3.5-5.6G ED VR -
2nd lens group unit
Caution : "R1 surface" of the 2nd lens-G unit (B2042) is aspheric lens.
Therefore, if dusts are attached to the lens surface of the 2nd lens group unit (B2042), blow
them away with a blower as much as possible. If impossible, dip a wiping cloth (Savina
Minimax) a little in ethanol, and wipe the surface lightly.
・
Set the zoom ring unit (B37) to WIDE-end.
・
Mount the focus sliding-frame fixed ring of the 2nd lens-G wrench (J11363). Then, turn it around until the
two protrusions (of the focus sliding-frame fixed ring) are fit in the two cutouts of the focus sliding frame
(#56).
Protrusion
Cutout (#56)
Grease:RR
Apply to the overall threaded portion.
Focus sliding-frame
fixed ring of [J11363]
B37
Surface of R1
Note: When the two protrusions (of the focus sliding-frame fixed ring of [J11363]) are fit in the two
cutouts of the focus sliding frame (#56), the fixed ring is fastened to the lens barrel each other,
so they can not be rotated.
INC