![background image](http://html1.mh-extra.com/html/niko/10-572/10-572_manual_1689552029.webp)
10-572 / 10-573
29
EN
8. MAINTENANCE
Dirt may prevent the internal unit from functioning properly. Therefore, always keep the device clean and dry. Use a damp cloth and soapy water to clean the device.
To avoid damage to the surface of the device, do not use any abrasive cleaning agents or pads, cleaning agents based on solvents, acid or acetic acid, or a
high-pressure cleaner.
If any parts of the internal unit are defective, please contact an authorised installer.
9. TECHNICAL DATA
Reference code
10-572 (surface mounting)
10-573 (flush mounting)
Dimensions 10-572 (surface mounting)
215 x 280 x 30 mm (HxWxD)
Dimensions 10-573 (flush mounting)
215 x 280 x 5 mm (HxWxD)
Dimensions flush-mounting box
197 x 262 x 32 mm (HxWxD)
Power supply voltage
24 Vdc ± 8 %
Surface-mounting box material
Zinc-plated steel with powder coating
Flush-mounting box material
Zinc-plated steel
Material front
Anodized aluminium and acrylic glass
Weight 10-572 (surface mounting)
2,045 g
Weight 10-573 (flush mounting)
1,960 g
Maximum input current
I(Pmax) = 240 mA
Input current in standby
I(a) = 0.4 mA, I(P) = 33 mA
Colour
Alu black
Screen
TFT colour screen (640 x 480 pixels, RGB) 14.5 cm (5.7”) diagonal screen size
Video signal
1 Vpp, symmetrical
Allowable ambient temperature
5 – 40 °C
Certification
CE marked
10. WARNINGS REGARDING INSTALLATION
• The installation should be carried out by a registered installer and in compliance with the statutory regulations.
• This user manual should be presented to the user. It should be included in the electrical installation file, and it should be passed on to any new owners.
Additional copies are available on the Niko website or via the Niko support service. The latest manual for this product is available on the Niko website at any time.
• During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology available at the time of installation.
- this user manual, which only states general regulations and should therefore be read within the scope of each specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations. If applicable, you can find the EC declaration of conformity regarding this
product at www.niko.eu.
11. NIKO SUPPORT
In case of doubt or if you'd like to exchange the product in case of a defect. Contact your wholesaler or the Niko support service:
• Belgium: +32 3 778 90 80
• The Netherlands: +31 183 64 06 60
Contact details and more information can be found at www.niko.eu under the "Help and advice" section.