18
10-501
Mount the base of the internal unit on a wall at the desired height using the installation
holes provided for this purpose (fig.2).
wall mounting
cable inlet
Fig.2: base of the internal unit for wall mounting and connection of the internal unit
Connect two wires of the cable to terminals a and b of the internal unit (tip: use the same
colour code for a and b as for the external unit).
Connect the other end of the cable to terminals a and b of the power supply module. Use
the same two wires as for the internal unit.
Connect the connector to the front using the terminal provided on the base of the internal
unit (fig.3).
Fig.3: connect the connector inside the internal unit
Click the front of the internal unit back onto the base (fig.1b), screw it down using the screw
provided and then snap on the finishing cap to conceal the screw.
Click the receiver cord into the connector provided for this purpose.
A B E P
�
EN
A B E P
