
EN
24
10-361
1. CONTENTS PACKAGING
1 x dome camera module 10-361
1 x hexagonal key
4 x fixing nut M4
1 x screwdriver with round handle
3 x liner 0.5 mm
1 x product information ”Dome camera module 10-361”
2. SAFETY WARNINGS
• Observe the climatic conditions, temperature and humidity.
• Do not place the camera directly in the sun.
• All electricity conditions must be met.
• Handle the device carefully. Do not drop the camera to prevent damage.
• Avoid powerful shocks or vibration.
• Also do not aim the camera directly into the sun! It could damage it, as that might cause the image sensor to fail.
• Mounting, installation and commissioning may only be carried out by qualified electricians!
• Do not try to fix the camera yourself. Only professionals and the customer service may perform repair work.
• Do not open the device. The camera does not contain any components which should be maintained by the user.
3. INTENDED USE
The dome camera module 10-361 is a separate functional module for use in modular external units.
4. SHORT DESCRIPTION
• The high-resolution image sensor ensures that all image points can be optimally adjusted. Thanks to the excellent high light sensitivity, the camera displays
colours and details perfectly, also with strong contrast and backlight.
• The output level of the 2-wire video signal from -3 dB to 9 dB is manually adjustable.
5. TECHNICAL DATA
5.1. Dome-camera
Power supply voltage
+26 V / DC (from P-conductor)
Housing
Dome
Anodized aluminium
Colourless acrylic glass, nano water block
H x W x D
125 x 105 x 42 mm
Weight
455 g
Allowable ambient temperature
−10°C to +50°C
Input current in standby
Maximum input current
I(a) = 0 mA
I(P) = 60 mA
I(Pmax) = 60 mA
Camera
Image sensor
Resolution
Light sensitivity
Focal length
Detection angle
Black Light Compensation (BLC), Auto Gain Control (AGC), Auto White Balance (AWB)
0,8 cm (1/3 inch) DPS
700 lines (TVL)
0,002 lux / F 1,2
f = 3,6 mm
approx. 90°
6-wire technique required !
5.2. Two-wire video transmitter
Power supply voltage
+24 V ± 8 % (power supply and control device)
Input current in standby
I(a) = 0 mA, I(P) = 17 mA
Maximum input current
I(Pmax) = 300 mA
Содержание 10-361
Страница 2: ...10 361 03 Nederlands 10 Fran ais 17 Deutsch 24 English 31 Sloven ina...
Страница 38: ...Notes 10 361...
Страница 39: ...Notes 10 361...