manualshive.com logo in svg

NIKKARI SSST, Инструкция по эксплуатации, Страница: 36 / 44

Поделиться
Скачать
NIKKARI SSST Скачать руководство пользователя страница 36

36

8. Installation of Grass Cutting Steel Blade (Option)

The following shows the installation procedure for the grass cutting steel blade (option). 
Make sure that required parts are all installed properly before attaching the grass cutting steel blade (option).

Note

●

Grass cutting steel blades, blade caps, nut covers and nuts are separately sold.  For purchasing,

contact your servicing dealer.

●

Be sure to use genuine parts.

●

Do not use a saw tooth blade.

Stop the engine, and pull out the 

trimmer/brush cutter attachment from 

the powerhead.

Put on gloves.

Remove the cutting-line head [1].

Loosen the

 

four fixed screws [2]

 using 

the tool supplied with the UMC 
powerhead

, and 

then 

remove the 

grass debris shield [3] and plate [4].

Before using the grass cutting steel blade of this product, be sure to replace 

the grass debris shield with the one for grass cutting steel blade.

* Otherwise, it will cause injury due to flying 

debris.

Note

●

Store the removed grass debris shield [3] and cutting-line head

 

[1] carefully.

Install the plate [4] of the grass debris 

shield for grass cutting steel blade 

[E], and fix it to the gear case [5] by 
tightening the four fixed screws [2]

 

using the tool supplied with the UMC 
powerhead

.

[1]

[2]

[4]

[3]

1

2
3
4

[2]

[4]

[5]

[E]

5

Содержание SSST













































Отзывы:

Нет отзывов