NIKKARI SSST Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 44

NIKKARI SSST Скачать руководство пользователя страница 28

28

4.7 Releasing Cutting Line

Note

●

Take care when removing the cutting line. The cutting line could have been cut into pieces, and they

could scatter when removing the cutting line.

When cutting line becomes shortened,

run the engine at full throttle (approx.
8,000 rpm). Then hit tap knob [1] of
spool against the ground surface
lightly and the line [2] is released from
the spool.

Note

●

If the cutting line does not come out when the

tap knob is pressed against the ground, stop the

trimmer/brush cutter and adjust the cutting line or

replace it.

(Refer to "5.3.1 Replacement of Cutting Line".)

4.8 Actions after Operation

After using the trimmer/brush cutter, take the following actions.

Set the start/stop switch to OFF (O side) to stop the engine.

Note

●

Make sure that blades rotation has come to a complete stop, before setting the unit down.

Tighten all the nuts, bolts, and screws other than the ones for adjusting the

carburetor.

Store the trimmer/brush cutter according to “6. Storing”.

[1]

[2]

1

1

2

3

«
...
26
27
28
29
30
...
»

Содержание SSST













































Отзывы:

Нет отзывов