10
-CAMERA
：
-MONITOR
：
Beep
：
ON/OFF(original default ON)
When SENSOR detects motions, monitor will
beep.
Beep Vol
：
High/Low(original default High)
Volume adjustment for beep
Brightness
：
0~10( original default 5)
LCD brightness adjustment
OSD Disp
：
ON/OFF
Date and antenna icon display set
View Mode
：
AUTO/MENU( original default
AUTO)
Single view and quad-view setting
(AUTO/MENU):
Under AUTO mode, single view will return to
quad-view automatically 20 seconds later
；
under
MENU mode, please switch from single view to
quad-view by manual.
Under MENU mode, if switch to single view,
there will no display on the screen if other sensor
lights detect motions.
Scan time
：
OFF/5SEC/10SEC/15SEC
(original default OFF)
Looping function, 4 CAMERAS display single
view on the screen in order.
Pair Cam
：
1/2/3/4
Register CAMERA ID
。
(up to 4 CAMERAS)
Version
：
software program version
Reset
：
YES/NO
Back to original default.
-Other
：
Date/Time
：
set time and date
CHARGE
Cam1 EV
：
-2.0~+2.0
Cam2 EV
：
-2.0~+2.0
Cam3 EV
：
-2.0~+2.0
Cam4 EV
：
-2.0~+2.0
Set the brightness of CAMERA. Standard value is
0, turn the knob to”-“side to reduce the brightness,
turn the knob to”+”side to increase the brightness.
Before attempting any setting, please power sensor
light. For multiple cameras, the brightness of each
CAMERA may be different, please adjust the
brightness to preferred value.
(Every adjustment value is 0.5. Original default is 0.)
Freq
：
50 / 60 Hz
Version
：
software program version
Reset
：
Yes/No
Back to original default.
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
Before registering ID, please push the
bottom button to stop sensor light
turning.
