9
Perform the following steps to get the rest of the hardware setup!
1.
Plug one end of the included Ethernet cable
into the LAN port on the back of the DVR.
NOTE:
Night Owl recommends
connecting to the Internet for
the best user experience.
2.
Plug the other end of the Ethernet cable into
a port on the back of your router / network
access point.
NOTE:
As long as your DVR is hardwired
using Ethernet cabling, you can
connect to any working network
access point. See your product
manual for more details.
4.
Connect the video / power cable labeled TO
DVR ONLY to an open video input on the DVR.
NOTE:
Make sure you twist and lock
BNC connectors.
5.
Connect the red female power leads of the
video / power cables to the male power
splitter ends.Make sure you twist and lock
BNC connectors.
3.
Connect the end of the camera’s cable to
the end of a video / power cable labeled TO
CAMERA ONLY.
RESET
LAN1
LAN2
LAN3
LAN4
WAN
5RXWHU1HWZRUN$FFHVV3RLQW
1RWΖQFOXGHG
From Camera
3RZHU&DEOH
Connectors
Connectors
3RZHU6SOLWWHU
9LGHR3RZHU&DEOH
IMPORTANT:
BEFORE installing, connect
and test each camera locally to
FRQȴUPWKH\IXQFWLRQSURSHUO\
To
CA
M
ER
A
To
C
A
