12
III. OPERATION
1. Turn the MAIN POWER SWITCH on.
Note: The Touch Screen Control Panel takes approximately 30-45
seconds to power on after main power switch has been turned on.
2. Use Touch Screen Control to turn on cooking chamber.
3. Verify ignition is complete, and all burners are lit.
4. Allow broiler to heat for 45 minutes before cooking.
The broiler is equipped with automatic ignition. When the chamber is turned on from
the Touch Screen Control Panel, a spark ignitor turns on with the flow of gas.
Gas then flows to all of the burners.
NORMAL IGNITION
PRE-LIGHTING PREPARATION
1. Broiler is centered under hood and plugged in.
2. The Incendalyst
™
must be installed.
3. Open gas valve. Tip: valve is open when
handle is in line with (parallel to) the pipe.
4. Turn ventilation system on.
WARNING
THE VENTILATION SYSTEM MUST BE
ON AT ALL TIMES DURING BROILER
OPERATION.
OPERATING BROILER WITHOUT
PROPER VENTILATION IS A SEVERE
FIRE HAZARD.
1
2
Operation: Lighting Procedures
