Utrecht
- Page 30 -
Ref. 001
5.6 ERASING OF RESULTS
In order to avoid confusion, it is advisable to erase all stored results before starting new family of
measurements. Sometimes only results stored under a certain object number or measuring place of the
object are to be erased, or even only a recalled result has to be erased To prevent confusion it is
important to follow the erasing procedure correctly.
All results are to be erased
Set the rotary switch in any position but the RS232 position.
Pressed key
Comments
is flashing.
By pressing this key again, the clearing will be confirmed.
All results will be erased.
Only results of a certain object (YYY) are to be erased
.
Set the rotary switch in any position but the RS232 position.
Pressed key
Comments
The last changed partial code (X.X.X of YYY), used for the recalling of the results, is
displayed.
Use the [DISPLAY] key to select an object code (without dots) if necessary.
Insert the desired code by using the [
↑
,
↓
] keys if necessary.
“
” is flashing.
By pressing this key again, the clearing will be confirmed.
