Nidek Medical LM-1800P, Инструкция по интерфейсу

Страница: 16 / 118

12
RS-232C Communication and USB Communication
:
Data Format
MLM26*RTZ002F
The LM transmits the following types of data. These types of data are output according to the lens
measurement mode, whether the data has been measured or not, and the condition for the lenses
(single, left or right).
 : Output if measured ×: Not output
*1: LM-1800PD only
Only when the parameter is set to “On”, the measurement is performed and data is output.
*2: 1st add power only
*3: Add power in negative value is sent as positive value.
Ex) SPH -2.00 ADD -1.00
→
SPH -3.00 ADD 1.00
*4: In the case of “single (not the right- nor left-eye lens)” state, only single data is output.
When both left- and right-eye lenses are measured, the data is output in following order:
“Right” “Left”.
In the order of “1) - 4)”
→
“Right 5) - 15) data”
→
“Left 5) - 15) data”
Measured lens mode
Prism
layout
Lens
*4
Single
vision
Progressive
power
Contact
lens
Single Right Left
1) Company name/Model name
   
Once at the beginning
2) Operator/ Patient ID
   
Once at the beginning
3) Patient number (print number)
   
Once at the beginning
4) Date and time
   
Once at the beginning
5) SPH, CYL, AXIS
      
6) SE (Spherical Equivalent value) × ×

×
  
7) ADD (1st/2nd add power)
*3 

*2
× ×
  
8) PRISM
      
9) Progressive length
*1
×

× ×
  
10) Channel width
*1
×

× ×
  
11) Green transmittance
      
12) UV transmittance
      
13) PD
 
×

×
 
14) Inside amount
*1
×

× × ×
 
15) Net prism
*1 
× × × ×
 
• The measurement data has been rounded off according to the cylinder mode, the indication
form of the measured prism data, and indication step specified on the LM.