Nidek Medical HandyRef-K, Руководство оператора

Страница: 90 / 130

84
OPERATING PROCEDURE: Connection and Handling of Peripheral Devices
3.11.2 Connection with computer
The following three types of connection are available for outputting data to a connected computer.
•
Connection by LAN cable (by station)
•
Connection by wireless LAN
•
Export by a USB flash drive
The availability of the communication methods differs depending on the connection type. See
“2.5.4 Functionality depending on communication method” (page 39) .
O
Connection by LAN cable (via station)
Connect the station and computer by a LAN cable.
In this configuration, the main body and station can only be connected by wireless LAN (AD HOC) or
the connection cable.
Infrared communication and wireless LAN (INFRA.) are not available.
●
Connection procedure
1)
Connect the main body and the station by the connection cable. When using a wireless LAN (AD
HOC only), set the relevant parameters for the main body and station.
2)
Connect the station and computer by a LAN cable, then set the relevant parameters.
●
Operation procedure
When measurement is complete, press on the main body.
Pressing prints and outputs the measured data to the computer at the same time (when the
“ 32. OUTPUT W/PRINT” (page 92) parameter is set to “YES”).
When the measured data is not going to be printed (when the “ 31. PRINT” (page 92) parameter
is set to “NO”), pressing outputs the measured data to the computer.
When the “ 31. PRINT” (page 92) parameter is set to “AUTO”, it is not necessary to press .
O
Connection by wireless LAN
Connect the main body and the computer by a wireless LAN.
●
Connection procedure
After setting up the wireless LAN network for the connected computer, set the relevant parameters for
the main body.
●
Operation procedure
Perform the same procedures described in “Connection by LAN cable (via station)” .
• When wireless LAN cannot be used due to radio interference or such, use a LAN cable or USB flash
drive for communication.