Nidec Powerdrive MD2S, Руководство по установке

Страница: 14 / 52

14
MECHANICAL INSTALLATION
Powerdrive MD2S Installation guide
4972 en - 2017.08 / d
2.6 - Dimensions
The cabinet-mounted Powerdrive MD2S solution is obtained by assembling drive cabinet modules 400 or 600 mm wide and 600
mm deep.
The table below gives the product width (W in mm) depending on the options incorporated:
No options (-B) With options (-O)
MD2S ratings
Width
W (mm)
Switch RFI filter
Braking
transistor
(1)
Width
W (mm)
100T to 150T 406
  
406
180T to 270T 406
  
606
340T & 400T 606
  
1006
470T & 570T 606
  
1006
600T to 1100T 1206
  
1806
1400T & 1700T 1806 -
 
2406 (2)
270TH to 500TH 606
  
1006
600TH to 900TH 1206
  
1606
1200TH to 1500TH 1806 -
 
2806 (2)
(1) The braking transistor kit comprises an MD2TF and a thermal relay calibrated to the braking resistor.
The following options can be incorporated into the
Powerdrive MD2S without altering its size:
• MD-AU1 emergency stop
• Communication modules
• Additional I/O modules
• Speed feedback modules
H
W
D = 600 mm
The table below gives the product height (H) depending on
the options incorporated:
Option Height (mm)
Powerdrive MD2S (standard)
2100
IP21 protection + 0
IP54 protection
+ 100
100 mm baseplate + 100
200 mm baseplate
+ 200
Baseplate for width ≥ 2,400 mm
(2)
+ 100
(2) Above 2,400 mm long (L), a baseplate 100 mm high
must always be installed to ensure the rigidity of all the
drive cabinets. This baseplate does not allow the cables to
pass through, but can be combined with a 100 or 200 mm
baseplate.
For more precise information depending on the options, use
the LEROY-SOMER configurator:
• http://configurateurls.leroy-somer.com