30
COMMISSIONING
MDX-I/O M2M - Installation and commissioning manual
5340 en - 2017.07 / c
Single (2):
Storage of selected variables stops as soon
as the trigger conditions are fulfilled. A single
storage file is created. This file is saved in the
SD card root directory. It is in the format log_
YYY-MM-DD_hh-mm-ss:
Year-Month-Day_hour-minute-second.
Note:
If no trigger mode has been selected,
storage only stops when “Stop” mode has
been selected or when the maximum number
of lines in the file is reached.
* For more information on the LED
operation, its location and the Datalogger
function, see section 5.
19.89
: Not used
19.90
: Event 1: minute, second
Adjustment range : 00.00 to 59.59
Format
: 16-bit
Used to display the time when
19.94
changes to Active (1) state, corresponding
to event 1, in minutes and seconds (the last
event is the one taken into account).
The 2 digits before the decimal point
correspond to the minutes, and the 2 digits
after the decimal point to the seconds.
19.91
:
Event 1: day of the month,
hours
Adjustment range : 01.00 to 31.23
Format
: 16-bit
Used to display the time when
19.94
changes
to Active (1) state, corresponding to event 1,
as a date (day of the month) and in hours (the
last event is the one taken into account).
The 2 digits before the decimal point
correspond to the day of the month, and the 2
digits after the decimal point to the hours.
19.92
: Event 1: months, years
Adjustment range : 01.04 to 12.99
Format
: 16-bit
Used to display the time when
19.94
changes
to Active (1) state, corresponding to event 1,
in months and years (the last event is the one
taken into account).
The 2 digits before the decimal point
correspond to the month, and the 2 digits after
the decimal point to the year.
