18
COMMISSIONING
MDX-I/O M2M - Installation and commissioning manual
5340 en - 2017.07 / c
19.08
: Clock configuration
Adjustment range : Time reading (0),
Preparing time setting (1),
Time setting (2)
Factory setting : Time reading (0)
Format
: 8-bit
Time reading (0):
The clock operates normally. To read the time,
day, month or year, look at parameters
19.03
to
19.06
.
Preparing time setting (1):
Used to set the clock date and time. After
configuring
19.08
as Preparing time setting
(1), set the year in
19.06
(e.g. 2012), the
day of the month and the month in
19.05
(e.g. 3.02 to indicate 3 February), the day of
the week and the time in
19.04
(e.g. 7.10
to indicate Sunday 10:00), and finally the
minutes and seconds in
19.03
(e.g. 33.00
to indicate 33 minutes and 0 seconds). Then,
configure
19.08
as Time setting (2) to take
account of the new settings.
19.08
then
automatically changes back to 0.
Time setting (2):
Used to take account of the values contained
in parameters
19.03
to
19.06
.
19.08
then automatically changes back to Time
reading (0).
CAUTION:
RTC tuning (
19.07
) may be necessary
after a month’s operation.
19.09
: Not used
19.10
: DO2 reading
Adjustment range : Inactive (0) or Active (1)
Format
: 8-bit
This parameter indicates the state of the
output.
19.11
: DO3 reading
Adjustment range : Inactive (0) or Active (1)
Format
: 8-bit
This parameter indicates the state of the
output.
19.12
: DI6 state
19.13
: DI7 state
19.14
: DI8 state
19.15
: DI9 state
Adjustment range : Inactive (0) or Active (1)
Format
: 8-bit
These parameters indicate the state of the
corresponding input.
19.16
: Sensor temperature
(KTY 84-130 or PT 100)
Adjustment range : 0 to 200°C
Format
: 16-bit
Indicates the temperature given by the sensor.
19.17
: Output relay 3 state
Adjustment range : Open (0) or Closed (1)
Format
: 8-bit
This parameter indicates the state of the
output relay.
19.18
: Output relay 4 state
Adjustment range : Open (0) or Closed (1)
Format
: 8-bit
This parameter indicates the state of the
output relay.
