Part # M017879450000 REV. July 1, 2011
13
ECOTECH EZ
TM
Variable Speed Motor/Control
a) Setting the clock
1. Press the Program Menu. You are now in the Menu
Options mode. The clock is flashing. Press ENTER.
You are now in the Function Setting Mode. The hour
digit(s) will be flashing.
2. Use the (up arrow), (down arrow), (left arrow),
(right arrow) to set the time and am/pm.
3. After you have set the correct time, press ENTER to
save the time and return to the Menu Options mode.
The Days of the Week will be flashing. If you want to
change or set the day of the week, press the ENTER
button and refer to Section B. If the correct day is
already set, proceed to step 4 below.
4.
Press Exit to return to the run mode then press the
RUN/STOP button to run the stored program. The
button will be illuminated when the program is running.
Please note: In the PROGRAM menu, if no button is pressed within 30 seconds, the unit will EXIT and return to the RUN mode.
How to program your ecotecH eZ
tm
motor/control
315612_MNJ26_VAR SPD_nonSRVS.indd 13
7/19/11 8:01 AM
