8
Part # M017879450000 REV. July 1, 2011
ECOTECH EZ
TM
Variable Speed Motor/Control
General Warnings
1.
Do not open the control enclosure. There is extremely
hazardous voltage inside. Do not service.
HIGH
VOLTAGE
DANGER
2.
Code requirements vary from state to state. Install
equipment in accordance with the applicable codes,
local ordinances, and in accordance with the National
Electrical Code.
3.
Always shut off the unit before performing
maintenance. Always disconnect electrical power
at the fuse box or circuit breaker before handling
electrical connections to be sure Power is OFF, and
that it cannot be turned on while you are working on
the equipment.
note:
The ECOTECH EZ
TM
Motor/Control is
programmed for an automatic start. Starting is
controlled by your program schedule or via user
input through the user interface mounted on top
of the motor.
note:
There is a small time delay before the
unit starts.
4.
Pump size and pump impeller size must match the
existing hydraulic system of the pool. The ECOTECH
EZ
TM
motor/control has the capability to power pump
ratings up to 3.5 total or service factor horsepower
(SFHP/THP) at 3450 RPM (100% Max Flow).
5.
This motor/control is intended to be used only above
ground. It is not a submersible pump motor/control.
315612_MNJ26_VAR SPD_nonSRVS.indd 8
7/19/11 8:01 AM
