Nidec DT-3015N, Инструкция по эксплуатации, Страница: 20 / 41

18
4.5.2 Instructions about function mode
How to move to function mode.
Turn the power ON while pressing the
“MODE” to enter the function mode.
Operation Display
The power switch ON
while
pressing “MODE”
In function mode 1, you can set weather to add decimal point. (Not reflected on EXT)
Operation Display
Change
the setting value
Go to
function mode 2
Turn the power ON
while pressing “MODE”
Displays “Func” for two seconds
And move to function mode 1
Indicates alternately
Go to function mode 2
*Previous setting value
The default setting is
“0.0
CCW
CW
CCW
：
0 ( add decimal point) CW
：
0.0 (no decimal point)
Turn the dial and it will stop
indicating alternately.