Nidec DT-3015N, Инструкция по эксплуатации

Страница: 11 / 41

9
4.1.1 LAMP ON / OFF
Press and hold the center of the dial to turn ON the LAMP when emission setting is displayed on the screen.
Press and hold again while flashing to turn OFF the LAMP.
*When turning the power switch OFF while flashing, it will be turned ON flashing at the next time.
4.1.2 Flash timer
When the Flash timer is set to a value other than 0 [minutes] in Function mode 3,
the flashing will automatically cease after set time from the start of the light emission.
When the flashing stops by this flash timer, the display indicates “OFF”.
Press and hold the dial to return to the previous display.
4.1.3 Heat Lamp Indicator
When the ambient temperature of the Xenon lamp rises above a certain level, the Heat Lamp Indicator will flash.
If the temperature rises more, the Heat Lamp Indicator will remain on and the light emission will cease.
* The temperature tends to rise more quickly the higher the emission frequency is set.
The ambient temperature of the Xenon lamp HEAT Light emission
Less than 65°C (149°F) Off Keep flashing
Over 65°C (149°F) Flash Keep flashing
Over 70°C (158°F) On Stop flashing
Operation Display
Press and hold
Operation Display
Press and hold
Press and hold the dial to flash.
Press and hold again to stop flashing.
Return to the previous display
After set time from the start