Nidec 22765-01, Руководство пользователя

Страница: 15 / 227

Mechanical
Probe Tip
Material
Polyphenylene sulfide (PPS)
Probe Case
Material
AISI 303 or 304 stainless steel (SST)
Probe Cable
75Ω triaxial, fluoroethylene propylene (FEP)
insulated probe cable in the following
lengths: 0.5, 1, 2, 5, or 9 metres (1.6, 3.3, 16.4, or
29.5 feet)
System Length
5 or 9 metres (16.4 or 29.5 feet) including
extension cable
Extension Cable
Material
75
Ω
triaxial, fluoroethylene propylene (FEP)
insulated
Probe and
Extension Cable
Armor
Flexible AISI 302 or 304 SST with FEP outer
jacket
5mm Probe
Tensile Strength
222 N (50 lbf) probe case to probe lead. 222 N
(50 lbf) probe lead to extension cable
connectors
Connector
material
Gold-plated brass or gold-plated beryllium
copper
Recommended case hole and tap size for 1/4-28 case
Drill Size 0.213in
Hole Size 0.218 to 0.222in
Hole Depth 0.376 to 0.750in
Tap Size #3
Recommended case hole and tap size for M8x1 case
Drill Size 7.5mm
Hole Size 7.625 to 7.72mm
Hole Depth 12 to 24mm
Tap Size M8x1
Probe case
torque
5.1 N·m (45in·lb) recommended
7.3 N·m (65 in·lb) maximum
Connector-to-
connector
torque
Refer to the following table: Recommended
Torque
Table 6: Recommended Torque
Connector Type
Tightening
Instructions
2 3300 XL gold "click" type connectors Finger tight
1 non-XL stainless steel connector
and 1 3300 XL connector
Finger tight plus 1/8
turn using pliers
Maximum torque
0.565 N
•
m (0.42 ft•lbf)
Minimum Cable Bend Radius 25.4mm (1.0in)
Weight
Total System 0.71kg (1.6 lb), typical
3300 5mm Probe 323 g (11.39 oz).
XL Extension Cable
34 g/m (0.4 oz/ft)
103 g/m (1.5 oz/ft) (armored)
XL Proximitor Sensor 246g (8.7oz)
Environmental Limits
Probe Temperature Range
-35
°
C to +177
°
C (-31
°
F to +351
°
F)
Note:
Exposing the probe to temperatures below –34
°
C (-30
°
F)
may cause premature failure of the pressure seal.
Extension Cable Temperature Range
-51
°
C to +177
°
C (-60
°
F to +351
°
F) for standard
extension cable. ref 141194-01
Probe Pressure
3300 5mm probes are designed to seal differential
pressure between the probe tip and case. The
probe sealing material consists of a fluorocarbon
O-ring. We do not pressure test probes prior to
Part Number 172036
Rev. K (05/16)
Page 7 of 16