Nidec 22765-01, Руководство пользователя

Страница: 168 / 227

Figure 4
Remove the cooler from the cooler housing.
Removing the cooler housing with the cooler in place:
• Disconnect and remove the cooler RTD’s and leak detector.
• Remove the fasteners connecting the cooler to the drip tray (if required).
• Remove the fasteners attaching the cooler housing to the generator.
See Figure 5.
•
Attach a hoist and chains to the cooler housing and lift the cooler housing
off of the generator. See Figure 6.
In the examples shown, the drip tray
is built into the cooler housing, and the
cooler does not bolt to it. Refer to the
specifi c drawings for you generator.
Use safe lifting practices to avoid dam-
age to the cooler or injury to personnel.
See the cooler weight on your draw-
ings or the cooler plate