Nidec 22765-01, Руководство пользователя

Страница: 6 / 227

www.metrix1.com • info@metrix1.com
Sales & Service Tel: 281-940-1802 • Fax: 281-940-1799 • REV A
Vibration - Condition Monitoring
and Protection
PROXIMITY
PRODUCTS
Trendsetter will support the following probes:
• 10000 and 7200 series probes with 5, 8 or 11
mm tips and 5 or 9 meter system lengths
• 3300 series probes with 5, 8 or 11 mm tips and
5 or 9 meter system lengths
• RAM series probes with 5 mm tips and 5 or 7
meter system lengths
• 3000 series probes with 0.190 or 0.300 in. tips
and 15 or 20 foot system lengths
Supply Voltage: 17 to 30 VDC
Maximum Loop Resistance: R
L
= 50 (V
s
-17) ohms
Terminal Block:
• Two piece, removable terminal block, for ease
of installation
• Accepts 16 to 28 AWG wire
Product Inputs:
Product Outputs:
4-20 mA proportional to Shaft relative vibration or Shaft
Position:
Vibration (TXR):
• 0-3 mils, 0-75 um pk-pk
• 0-5 mils, 0-125 um pk-pk
• 0-10 mils, 0-250 um pk-pk
Position (TXA):
• 20-80 mils, 0.5-2.0 mm; (5 mm, 8mm, 0.190 in.
and 0.300 in. probe)
• 20-160 mils, 0.5-4.0 mm; (11 mm probe)
Not OK indication: A not OK condition is normally caused
by an open probe coil or cable, probe gap outside the
linear range or supply voltage below 16Vdc. The TXR and
TXA output will be < 3.6 mA under the above conditions.
Proximity Probe Transmitter
Trendsetter Model TXR (Radial) and TXA (Axial)
Weight & Dimensions
(P/N 9647)
1.21
Weight = 0.6 pounds
Hazardous Area Ratings:
• CSA Certifi ed: Intrinsically Safe Class
I, Div 1, Grps A, B, C & D, Temp
Code T4.
• CSA Certifi ed: Non-Incendive Class
I, Div 2, Grps A, B, C & D
• BASEEFA Certifi ed: Intrinsically Safe Ex
ia IIC T4, Non-Incendive Ex ia IIC T4
Specifi cations (continued)