Nicotra EC FAN FDP, Руководство по эксплуатации, Страница: 37 / 40

Rev. 0 - 11/12/2020
OPERATING MANUAL OPERATING MANUAL
EN EN
37/40
Input Register 17: Alarm 2 [Adim]
This register must be combined with the Alarm1 register.
Input Register 28: Enable Input [Adim]
This input indicates the ENABLE state.
The value must be multiplied by 10V/2
16
to have the corresponding voltage value.
Input Register 29: Analog Input [Adim]
This input indicates the Reference Value.
The value must be multiplied by 10V/2
16
to have the corresponding voltage value.
Input Register 30: Transducer Input [Adim]
This input indicates the Transducer Value.
The value must be multiplied by 10V/2
16
to have the corresponding voltage value.
Input Register 31: Measured Power [W]
This register indicates the absorbed power.
Input Register 32: Input Current [mA]
This input indicates the input absorbed current.
16.5 Fan info and Modbus registers
The Holding Register 44 indicates the fan model.
The Input Register 0 indicates the driver firmware version and the Input Register 1 indicates the driver model.
1-Phase
1.05kW
Firmware
Version
6
Frequency
Converter
Model
41505
Frequency
Converter
Code
1431C1
200/190
1413H3
200/240
1413H3
200/240
1413H4
9/7
1413H3
9/9
1413H3
200/190
1413G6
180/240
1413G6
1.05kW 1-Phase
1 2 2 3 4 5 6