Nicherons FXO, Руководство пользователя, Страница: 19 / 53

SpoTel Series Voice Gateway:-­‐ User Manual
16
configure.
Voice 802.1p Priority
（
0-7
）
802.1 protocol to control network traffic priority,
Priority from 0-7.
Voice VLAN use following
separate IP interface
Can use dynamic or static IP address
Voice VLAN DNS Server Can use dynamic or static DNS server address
Management
VLAN
Management 802.1Q VLAN
ID(0-4095)
Fill out an ID to describe a data VLAN group, ID 0
used to management VLAN, can’t used to service
configure.
Management 802.1p Priority
（
0-7
）
802.1 protocol to control network traffic priority,
Priority from 0-7.
Management VLAN use
following separate IP interface
Can use dynamic or static IP address
Management VLAN DNS server Can use dynamic or static DNS server address
【
Note
】：
Restart the device to apply changes
4.5.3 ARP
ARP brief introduction:
ARP is address resolution protocol. After configuring ARP, users can get physical address
through device IP address. Under TCP/IP network environment, each host is assigned a
32-bit IP address. ARP is a tool that converts IP address into MAC address.
ARP configuration interface as follows:
Figure 4.5-4 ARP Parameters
4.6 SIP Server
SIP server introduction: