Nicherons FXO Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 53

Nicherons FXO Скачать руководство пользователя страница 16

SpoTel Series Voice Gateway:-‐ User Manual

13

4.4 Quick Setup Wizard

Quick configuration wizard will guide users to configure the device step by step. Users only

need to configure network, SIP server and sip port during the setup. Basically, after these three

steps, users are able to make voice call through the gateway.

4.5 Network Configuration

4.5.1 Local Network

There are two modes, namely, route and bridge. When the gateway is set as route mode,

the gateway will work as small router and NAT function is enabled. In this setup, WAN

port normally connect to uplink router/switch or ADSL MODEM, while LAN port connects

local computer or other network device (such as Ethernet switches, Hubs etc). When

bridge mode is set, WAN and LAN ports are daisy chained together as in Ethernet switch.

In bridge mode, only WAN IP address and DNS should be configured. In route mode,

default LAN IP is 192.168.11.1 but could be changed by users.

Network configure interface as below:

Figure 4.5-1 Local network

«
...
14
15
16
17
18
...
»

Содержание FXO






















































Отзывы:

Нет отзывов