Nicherons FXO, Руководство пользователя, Страница: 10 / 53

SpoTel Series Voice Gateway:-­‐ User Manual
7
conditions. If the service provider supports T.38, please use this method by selecting T.38
as fax mode (default). If the service provider does not support T.38, pass-through mode
could be used. If there is problem sending or receiving Fax, toggle the Fax Tone Detection
Mode setting.
3. Local IVR Operation
3.1 Inquire IP address
After attaching an to a FXS ports, feature code could be dialed to inspect the current ip
status.
: dialing *158# to inquire LAN IP address
: dialing *159# to inquire WAN IP address.
3.2 Factory Reset
Dial *166*000000#, then hang up. The gateway will then reboot.
3.3 Configure LAN Port’s IP Address
Before configuration, please ensure:
（
1
）
The device is power on;
（
2
）
device is connected
to the network;
（
3
）
Telephone is attached to FXS port.
1) Configure dynamic IP address by DHCP
：
Off-hook; Dial “*150*2#”; On-hook/hang up;
After 10 seconds, the device will reboot.
2) Configure Static IP address
Off-hook; Dial “*150*1#”; On-hook;
Then configure IP and mask as follow:
•
Configure IP address
：
Off-hook; input “*152*172*16*0*100# ”; On-hook
•
Configure subnet mask
：