Niceboy VEGA X PLAY, Руководство пользователя

Страница: 20 / 75

20
MICRO SD CARD
Select a brand name micro SD card with a capacity of 64GB, type UHS-I U3. The memory card
must be formatted in a PC to the FAT32 file system before its first use.
Only use programs designated for formatting SD cards. Insert the memory card into slot (7)
with the PINs facing the camera lens (front part of the camera). Insert the memory card into
the camera until it clicks. Eject the memory card by pressing it until it clicks out of the slot (7).
Notice: regularly format the memory card in a PC in order to avoid errors with recorded videos.
The manufacturer of the SD card you selected may supply you with more information about
using or formatting your memory card.
BATTERY/CHARGING
To insert or remove the battery, open the cover on the underside of the camera. Connect a
USB cable to the USB port (6) located on the left side of the camera for charging the camera.
Connect the other end of the cable to a charging adapter, ex. a mobile phone charging adapter
(5V voltage and electrical current minimum of 1A). The camera may also be charged by connec-
ting the USB cable to the camera and then to a PC or powerbank.
Notice: fully charge the battery before the camera’s first use. Don’t expose the battery to large
temperature differences. Supervise the camera while the battery is charging. The time it takes to
charge the battery depends on the electrical current type of your charging adapter. The camera
charges faster when powered off.
POWER THE CAMERA ON/OFF
Power on/off the camera by pressing and holding the power button (9).
SWITCHING BETWEEN CAMERA MODES
Switch between individual camera modes by pressing button (9). The camera comes equipped
with the following modes:
1. Video mode
Start and stop filming by pressing button (10).