background image

CMOS-300

CMOS-200

UNIVERSAL MULTI-VIEW CAMERA/ UNIVERSAL REAR VIEW CAMERA

INSTRUCTION MANUAL

CAMÉRA MULTI-VUES UNIVERSELLE/ CAMÉRA DE RECUL UNIVERSELLE

MODE D’EMPLOI

UNIVERSAL MULTIVIEW-KAMERA/ UNIVERSAL RÜCKFAHRKAMERA

BEDIENUNGSANLEITUNG

UNIVERSELE MULTIVIEWCAMERA/ UNIVERSELE ACHTERUITRIJCAMERA

GEBRUIKSAANWIJZING

TELECAMERA MULTIVISIONE UNIVERSALE/ TELECAMERA PER RETROMARCIA UNIVERSALE

ISTRUZIONI PER L’USO

CÁMARA DE MULTIVISIÓN UNIVERSAL/ CÁMARA DE VISTA TRASERA UNIVERSAL

MANUAL DE INSTRUCCIONES

CÂMARA MULTIVISÃO UNIVERSAL/ CÂMARA TRASEIRA UNIVERSAL

MANUAL DE INSTRUÇÕES

© B64-4756-18/01 (W)

Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best 
performance from your new Universal Camera.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the 
warranty card, and in the space provided  below. Refer to the model and serial numbers 
whenever you call upon your Kenwood dealer for information or service on the product.
Model CMOS-300/CMOS-200  Serial number                                      

US Residence Only

Register Online

Register your Kenwood product at 

w w w.Kenwoodusa.com

  

 

Содержание CMOS-200
















Отзывы: