Current as of 2018-10-23
Instruction Manual for
M67 Flip Holder/Double Flip Holder for
MWL-1
PN# 86221, #86222
F
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize the
requirements of professional as well as amateur underwater
photographers and fulfill them through the innovative designs of our
products. We strive to achieve a high level of user-friendliness by
allowing stress-free installation and easy operation of all important
functions of the camera.
Please read this manual carefully before using the product, this will
maximize its performance as well as its lifetime.
W
ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for
consumer use.
This warranty only applies to products purchased from
authorized NAUTICAM dealers and does not extend beyond the original
retail purchaser.
To return your product for service, please contact your regional
authorized service center(s). Please note that this warranty only applies
when the product is purchased in the territory where the service center
is located.
NAUTICAM does not hold responsibility for damage, of any nature, to
any equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthorized modifications and/or repairs of our products will
automatically
Press the lever and flip the holder to the side then remove the
locking ring from the flip holder.
Align the two positioning screws on the back of the holder with
the slots on the front of the port.
The position of the flip holder can be changed by relocating the
two screws in the threaded holes around holder.
Fasten the holder by screwing the locking ring into the thread
on the front of the port.
---Continue on next page---
INSTALL
TO
THE
PORT
Press
