Niceboy PARTY BOY 2, Руководство пользователя

Страница: 12 / 50

12
MICRO SD CARD MODE
Insert the micro SD card into the slot (19), and the speaker will automatically switch to the appropriate
mode. This is announced by an acoustic prompt, and „TF“ will light up on display. To start or pause a
track, briefly press the button (6). To control the volume, briefly press buttons (5) and (7). Press and hold
buttons (5) and (7) to skip to the next or previous track.
Note:
File format support: MP3 / WAV / WMA / FLAC. The maximum capacity of the card is 64GB.
ILLUMINATION MODES
Briefly press the button (12) to switch between 4 rotating illumination settings or to switch them off.
Press and hold (12) to activate the monochrome mode. You can switch between the individual colours
by briefly pressing the same button. Press and hold the same button to deactivate the mode.
MICROPHONE AND INSTRUMENTS
The speaker must be turned off before connecting a microphone or musical instrument. Switch the
supplied microphone to the ON position. Connect a microphone to the input (15), guitar, or another
instrument to the input (14), and turn the speaker on. Use the (3) button to control the microphone and
instrument volume and the (2) button to switch between the microphone and instrument controls. Use
the (4) button to control the ECHO effect for the microphone.
NICEBOY MULTISESSION MODE
Up to 98 other speakers can be connected to the Niceboy PARTY BOY 2 100W speaker.
1. Switch the speaker on and activate Bluetooth on your device. Select “Niceboy PARTY Boy 2 100W” in
the list of available devices.
2. Press and hold the Multisession button (11); the letter A will appear on display.
3. Switch the second speaker on, then press and hold the Multisession button (11). The letter B will
appear on display and both speakers will connect successfully. If you want to connect a third speaker
or more, repeat step 3.
To disconnect the speaker, press the Multisession button (11).
POWERBANK FUNCTIONS
To charge your device, connect the USB-A cable to the USB port (18). The output voltage of the port is
5V, and the current is 2A.
FACTORY SETTINGS
In the event of technical problems, reset the speaker to the factory settings. Speaker must be turned
on. Insert any narrow object (needle, pin) into the reset opening (16). The speaker will automatically turn
itself off. When you turn the speaker manually on again, the process is completed.
PACKAGE CONTENTS
Niceboy PARTY BOY 2 100W speaker
USB-C charging cable
3.5 mm jack audio cable
Microphone
User manual