Niceboy PARTY BOY 2, Руководство пользователя

Страница: 10 / 50

10
EN
PRODUCT DESCRIPTION
1. Speaker on / off / mode change
2. Microphone/guitar control switch
3. Microphone/guitar volume control
4. Microphone ECHO effect control
5. Decrease volume / Previous song
6. Play / Pause
7. Increase volume / Next song
8. Equalizer for microphone bass
9. Equalizer for microphone treble
10. Bass boost button
11. Multisession button
12. Lighting control
13. Bluetooth button
14. 6.3mm input for guitar or another musical instrument
15. 6,3mm input for microphone
16. Speaker reset
17. 3,5mm input for AUX cable.
18. USB disc input / powerbank output
19. Micro SD card slot
20. USB-C input for speaker charging
CHARGING
We recommend that you fully charge the speaker before using it for the first time to maximize battery
life. It takes approximately 6 hours to charge fully. To charge the loudspeaker battery, connect the
supplied USB-C cable to the charging port (20) and connect it to any charging adapter (5V voltage and
at least 2A output current) or a USB in a PC. The progress of charging is indicated by a red LED next to
the charging port. When fully charged, the diode turns off. While in standby mode, an acoustic signal will
indicate a low battery.
Note:
Use a quality adapter to charge the speaker. We recommend using the 5V 2A adapter specification.
POWER ON / OFF
To turn on/off the speaker, press the turn on/off button (1) for approximately 3 seconds. Each time you
turn the speaker on, the volume will be set to approximately 50%. The speaker is always in Bluetooth
mode after being switched on.
Note:
When turned off and on again, the speaker remains at the previous volume and light mode settings and
will automatically connect to the last paired device. To reset the speaker, read the FACTORY SETTINGS
section.