Niceboy PARTY BOSS, Руководство пользователя

Страница: 18 / 64

18
RECORDING
When wireless or wired microphone or musical instrument is connected via the microphone
inputs, you can record the singing / musical instrument to a USB drive or SD memory card.
The storage medium must contain at least one mp3 or WAV audio file in order to be detected
by the device.
1. Turn the speaker off and connect other instruments to the MIC.IN or GT.IN inputs.
2. Turn the speaker on.
3. Insert a USB drive or SD card into the appropriate USB or SD CARD slots.
4. The speaker will switch to the appropriate storage media mode.
5. Briefly press the REC button to start recording your audio track. The recording is indicated
on the display by REC.
6. To end the recording, press the REC button briefly again.
7. The speaker will automatically play the recorded audio track.
8. To delete a track, press and hold the REC button.
9. Use the PREV and NEXT buttons to switch between the recorded tracks.
PACKAGE CONTENTS
Niceboy PARTY Boss 200W speaker
Power cable
Wireless microphone
Remote control
3.5 mm jack cable
2x AA batteries
2x AAA batteries
Operating instructions
PARAMETERS
Bluetooth version: 5.0
Degree of protection: IPX4
RMS performance: 200W
Power supply: 100–240V, 60/50Hz
Battery: 4A 12V
Charging time until charged: 4 hours
Battery life: 8 hours
Woofer: 2 x 8”
Frequency range: 20 Hz-6 kHz
Impedance: 3Ω, ± 10%
Sensitivity: 88db, ±2dB
Tweeter: 2x2”
Frequency range: 40Hz - 20kHZ
Impedance: 4Ω, ±15%
Sensitivity: 85dB,±3dB
Microphone: wireless, directional
Frequency: 40 Hz- 15 kHz
Impedance: 10kΩ / 1kHz
Sensitivity: 5dB
This product complies with all the basic requirements of relevant EU directives.